Contacting the local post office or express company to assist customs clearance is the responsibility of every customer, if the buyer refused to contact the local post office or express company causing the goods to be returned or destroyed, the buyer need to bear all the losses.
The shipping time depends on the buyer's customs clearance time or force Majeure.
If buyer does not receive the goods in a long time, we hope buyer can contact the local post office or express company and provide them with the tracking number, in order to get the goods soon.
In some countries, such as Brazil, the local customs require each buyer to pay about 3.5 dollars of tariffs, so when your goods arrive at the local customs, please contact the local post office or express company and provide the tracking number to the local post office. This is simple.
If you are from Brazil, please give us your CPF number or fill it in your address. (VAT: CNPJ/CPF)
About the declared value:
It is well known that many countries tax is expensive, therefore, we will fill in the product information as: Air purifier, 1pc, 15 dollars.
If the local customs needs the commercial invoice, please contact us.
If you need us to fill in the real value of goods, please leave a message to us.
If you have any questions, please leave a message to us, we will reply your message within 24 hours.
Product picture: (When the product works, there is no electricity on the red radiator, which is very safe)
There is no need to distinguish between inlet and outlet.
Inlet: We recommend that you use 6*8mm silicone tube or 6*8mm PU tube.
Outlet: We recommend that you use 6*8mm Teflon tube.
If you need to change the connector, please contact us.
Product name: Quartz tube type ozone generator Kit
Cooling way: Air cooling
Gas source: Air source, oxygen source
Gas pressure: <200kpa (2bar/0.2MPa, If the pressure exceeds 70kpa, please let us know)
Environment: <40 degrees Celsius, <85%RH
Temperature rise: <8 degrees Celsius
Heat dissipation effect: Increase 1.6 times
Ozone concentration: Increase 10%-15%
Inner electrode: 316L stainless steel tube
Product application: Air purification and water sterilization
Service life / Warranty: More than 20000 hours / 2 year
Customized: Can be customized
Can be customized: 4-20mA / 0-10V / 0-5V (Connect PLC or ORP controller)
Product parameters: (Test ambient temperature: 20 degrees Celsius)
Dehydroxylation High Purity Silica Quartz Tube Ozone Generator Kit:
#1: Quartz tube composition:
99.9% silica, with strong hardness, high temperature resistance, low coefficient of thermal expansion (CTE), thermal shock resistance, good chemical stability & electrical insulation properties.
#2: High efficiency:
Narrow- gap discharge of 0.4MM, with high ozone conversion rate and low noise.
#3: Low power consumption:
High-voltage high-frequency corona discharge, with a power consumption rate of 6~10KW.h/kg O3.
#4: High voltage resistance:
The operating voltage of the tube is only 1/5 of its breakdown voltage, with a high dielectric constant.
#5: High quality:
The dielectric material is made of high-purity silica quartz, sintered at the high temperature, with high precision and uniform discharge. It is equipped with the 316L stainless steel inner electrode, solid fasteners, PTFE nozzles and anti-corrosion high-purity fluorine rubber ring seals. The latest Sunflower aluminum alloy heat dissipation technology is applied for external air cooling of heat dissipation, which can achieve more efficient heat dissipation. And the long time ozone decay is very low, <1/10.
#6: Service life:
More than 20,000 hours.
You still need:
For air disinfection: Cooling fan, insulating board, air pump (air source or oxygen source), silicone tube.
For water disinfection: Cooling fan, insulating board, air pump (air source or oxygen source), silicone tube, teflon tube, air stone (or Venturi).
(If you use air source, and the local area is very humid, we recommend that you install an air dryer)
Ozone tube: You need to install it on the insulating board, away from the metal shell for more than 2cm. (You can install it on the metal case, in that case you need to connect your case with the extra ground wire)
Ozone PSU: You need to install it on the insulating board, away from the ozone tube and metal shell for more than 3cm.
Red high voltage wire: Away from the metal shell and other wires for more than 2cm.
You need cooling fan to cool the ozone tube and the ozone PSU.
When you get our products, you will get installation instructions, operation instructions and wiring diagrams.
If you still have any questions, you can contact us at any time.